Ur 3.0 The leader light

[psweden]

Hello
I got a 36 m 4 lane nincotrack
I use UR 3.0 to do the lapcount.
Recentley we had a 12 hour competion. We drove 40 minuts then 5 minuts to change track and
driver. I have built a lightkit with 4 lights one for each color of the lanes. Using a phidget it shows witch lane that is in the lead. The trouble is when the 40 minuts is past and we change lanes
the color doesn't follow the leader. If red lane is in the lead after 40 minuts, it shows red lane after the switch of lanes. Is it posible to setup the 12hour competition in another way. I use heat mode "time staggered" - with 4 rotations - Durations 40 minuts - and intersegment 300. Would be very cool if the leader light could follow for all 12 hours. The lights is colored

Nice to get some answers

[Ricky Torpedo]

which kind of race do you play? Staggered?

[psweden]

Yes we used heat mode time staggered
And the rotations of 4 with a 40 minut duration and a intersegment of 300

[Ricky Torpedo]

UR3 manages leader lights per driver instead of lane (digital requirement). I have added an enhancement request in .30 to manage this leader light per your need (per lane for analogic & per driver for digital)

[psweden]

Looking forward to next update
Very good program

[Ricky Torpedo]

you can join us on http://uracer.freeforums.org/ if you want to test the new release Any helps are more than welcome.

The way you play points out couple of leaks in the new release. I added them for implementation in the new release.