CE Raceway 045
Date: 06/12/2008
CORRA'S RACEWAY
Here's my 2-lane Ninco layout. Set up is on a 2.5 meter x4 meter table space with a nice balance of straight-a ways and turns for both speed and yet still be challenging.
CE Raceway 046
Date: 06/12/2008
Powered with a 0-30 volts 10 amps power supply. Also using the one wall as n nice pits area.
CE Raceway 048
Date: 06/12/2008
I added 30 lamp posts, each equipped with a 5 volts LED, all the buildings are lightened inside and outside with LED'S.
CE Raceway 067
Date: 06/12/2008
DSC00174
Date: 06/12/2008
DSC00175
Date: 06/12/2008
Jagermeister Truck 005
Date: 06/12/2008
LIDA 60 EN PRO STOCK RACER 062
Date: 06/12/2008
LIDA 60 EN PRO STOCK RACER 063
Date: 06/12/2008
PRO STOCK RACER 012
Date: 06/12/2008
PRO STOCK RACER 038
Date: 06/12/2008
Raceway2 006
Date: 06/12/2008
Also the grandstand and the track are lightened with yellow, green and red LED'S powered by a 12 volts 2 amps AC power supply.
Raceway2 019
Date: 06/12/2008
Raceway2 020
Date: 06/12/2008
Raceway2 027
Date: 06/12/2008
Raceway2 029
Date: 06/12/2008
5 flood lights and also a pits 8 spotlight so I can organize night races. In total are there 180 lights working on the track.
Raceway2 031
Date: 06/12/2008
Raceway 003
Date: 06/12/2008
Raceway 3 002
Date: 06/12/2008
Raceway 3 010
Date: 06/12/2008
Raceway 3 019
Date: 06/12/2008
Raceway 3 024
Date: 06/12/2008
Raceway 3 025
Date: 06/12/2008
I'm really proud of my 6 doors garage, made of wood and all the scenery on the track; I had here and there some New Ray and Carrera stuff that I've used. All other buildings are handmade by me using correy flex (getting the ideas from scaley and scx). The bridge is made of polystyrene, the tables and chairs are made of balsa wood. ALL the racing stickers and logos I surfed from a lot off nice web sides and was then resized and printed on Laser Copier Inkjet covered with Dc fix. Most of the 300 figurines were hand painted by me.